How to maintain the customized low noise oxygen concentrator to make it last longer? I believe that the salesperson must have taught and guided it when purchasing, but many people may forget as time goes by. If you want to extend the life of customized low noise oxygen concentrator, daily maintenance is definitely essential. So how should you do daily maintenance?
1. Daily maintenance of oxygen suction tube:
The nasal tip on the oxygen tube is the easiest to get dirty, and it is recommended to clean it after each use. It can be wiped with alcohol, or soaked in warm water for 5 minutes, and then washed with clean water, which is very simple. The oxygen inhalation tube can be replaced once a month, and attention should be paid to keep the inside of the tube dry and free of water droplets.
2. Daily maintenance of the humidification cup:
Because the humidification cup is filled with water, the bottom of the built-in hose will cover the surface with water and alkali after a long time, and it will easily block the air inlet over time. You can develop the habit of changing the water every day. Pure water or distilled water is enough, every half Drop in white vinegar and soak for half an hour, use a toothpick to pass through the small hole at the bottom, rinse well and then use it normally.
3. Daily maintenance of the filter element:
The life of the customized low noise oxygen concentrator is closely related to the filter element. Cleaning or replacing the filter paper core in time can not only prolong the life of the customized low noise oxygen concentrator, but also protect the molecular sieve and compressor. If the filter element is found to be damaged or the filter element of the machine reaches the specified service time, it should be replaced in time. It is recommended to use 800-1000 hours for replacement, the specific situation is related to the frequency of use and the use environment.
4. Requirements for the use environment:
The air source inlet of the customized low noise oxygen concentrator should be located in a place with less pollutants and better ventilation and heat dissipation. Oxygen has a combustion-supporting effect, so keep away from flammable and explosive materials. If the customized low noise oxygen concentrator is not in use for a long time, please cut off the power, pour out the water in the humidification cup, wipe the surface of the oxygen generator, cover it with a dust cover, and store it in a dry place without sunlight .