The high-voltage discharge type Ozone Disinfector from China manufacturer uses a high-voltage current of a certain frequency to create a high-voltage corona electric field, so that the oxygen molecules in or around the electric field undergo electrochemical reactions to produce ozone. This ozone disinfection machine has the advantages of mature technology, stable operation, long service life and large ozone output (a single machine can reach 1Kg/h), so it is the most widely used Ozone Disinfector from China manufacturer in related industries at home and abroad. High pressure discharge ozone disinfection machines are divided into the following types:

1) Ozone Disinfector from China manufacturer is divided according to the high-voltage electric frequency of the generator, there are three kinds of power frequency (50-60Hz), intermediate frequency (400-1000Hz) and high frequency (>1000Hz).

2) According to the gas raw materials used, there are two types: oxygen type and air type. The oxygen type is usually supplied with oxygen from an oxygen cylinder or an oxygen generator. Air type usually uses clean and dry compressed air as raw material.

3) Ozone Disinfector from China manufacturer According to the cooling method, there are water cooling type and air cooling type. When the ozone sterilizer works, it will generate a lot of heat energy and needs to be cooled, otherwise the ozone will be decomposed while being generated due to high temperature.

4) Divided by dielectric materials, there are several common types such as quartz tube (a kind of glass), ceramic plate, ceramic tube, glass tube and enamel tube.

5) Ozone Disinfector from China manufacturer According to the structure of ozone sterilizer, there are two types: gap discharge type (DBD) and open type. Gap discharge generators can be used in place of open generators. However, the cost of the gap discharge ozone sterilizer is much higher than that of the open type.