Oxygen pipeline is an important facility for transporting oxygen. Since oxygen is a combustion-supporting gas, hot sale oxygen concentrator Manufacturers china should pay attention to the following points when laying:

　　① hot sale oxygen concentrator Manufacturers china The selection of oxygen pipes should be suitable for the flow rate and pressure of the oxygen to be transported.

　　② The oxygen pipeline can be laid in three ways: overhead laying, trench laying and buried laying.

　　③ hot sale oxygen concentrator Manufacturers china Oxygen pipes must be erected on non-combustible supports.

　　④ The oxygen pipeline should not pass through the high temperature and flame area. If it must pass, heat insulation measures should be added to the pipe section. The temperature of the pipe wall should not exceed 700°C.

　　⑤ The oxygen pipeline shall be provided with a grounding device to remove static electricity.

　　⑥hot sale oxygen concentrator Manufacturers china Oxygen pipes should avoid turning as much as possible, the elbow should have a larger bending radius, and the interior should be smooth.

　　⑦ Oxygen pipeline valves and their accessories must be cleaned of rust and degreasing before installation.

　　⑧ hot sale oxygen concentrator Manufacturers china Oxygen main line should be equipped with fire retardant copper pipe.

　　⑨ When the oxygen branch pipe for cutting and welding is connected with the hose for cutting and welding tools or equipment, the oxygen supply valve and cut-off valve shall be installed in a protective box made of non-combustible materials.