1. Two flowmeter oxygen concentrator factory thinks that the main engine is mounted on a wheel as a floor-mounted or hung on a rack against the wall and hung outdoors, and a gas collection filter is installed;

2. Nail the oxygen supply plate on the wall or support as needed, and then hang the oxygen supply;

3. Two flowmeter oxygen concentrator factory thinks that the oxygen outlet port of the oxygen supply is connected with the oxygen supply tube, and the 12V power line of the oxygen supply is connected with the 12V power line of the host. If multiple oxygen suppliers are connected in series, only need to add a three-way joint, and fix the pipeline with a wire buckle;

4. Plug the 220V power cord of the host into the wall socket, and the red light of the oxygen supply will be on;

5. two flowmeter oxygen concentrator factory It is recommended to add pure water to the designated position in the humidification cup. Then install it on the oxygen outlet of the oxygen supply;

6. Please put the oxygen tube on the oxygen outlet of the humidification cup;

7. two flowmeter oxygen concentrator factory Press the oxygen supply start button, the green indicator light is on, and the oxygen concentrator starts to work;

8. According to the doctor's doctor's advice, adjust the flow to the desired position;

9. two flowmeter oxygen concentrator factory It is recommended to hang up the nasal cannula or wear the mask to inhale oxygen according to the illustration on the packaging instructions of the oxygen inhalation mask or nasal straw.