The following two flowmeter oxygen generator suppliers introduce the specific operation method of the oxygen generator.

　　1. The server should be installed on the floor or on the wall, and a gas filter should be installed;

　　2. The two flowmeter oxygen generator suppliers must nail the oxygen gussets to the wall or support frame, and then suspend the oxygen generator;

　　3. Connect the O2 inlet and outlet of the O2 supplier to the O2 transmission pipeline, and connect the 12V power plug of the O2 supplier to the 12V power plug of the server.

　　4. The two flowmeter oxygen generator suppliers feel that when the server 220V power plug is inserted into the wall power socket, the O2 supply green light is on;

　　5. Please add purified water to a specific part of the humidifying cup. It is then installed at the oxygen outlet of the oxygen production equipment;

　　6. Please put the O2 delivery pipe on the O2 inlet and outlet of the humidifying cup;

　　7. The two flowmeter oxygen generator suppliers recommend pressing the oxygen generator operation button, the emerald green display light is on, and the oxygen generator starts to work;

　　8. Adjust the total flow to the required parts according to the doctor's instructions;

　　9. The two flowmeter oxygen concentrator suppliers recommend that you hang up the nasal cannula or wear a mask to inhale oxygen according to the packaging instructions of the oxygen mask or nasal plastic straw.