新闻中心

新闻中心

NEWS CENTER

How to use a low noise oxygen concentrator

(Summary description)Take the low noise oxygen concentrator out of the box and place it stably next to a suitable socket indoors (no other electrical appliances should be connected to the socket used at the same time); at least 15 cm away from walls, fabrics or other objects; make sure there is no surrounding Heat sources and light and dark fire sources.

How to use a low noise oxygen concentrator

(Summary description)Take the low noise oxygen concentrator out of the box and place it stably next to a suitable socket indoors (no other electrical appliances should be connected to the socket used at the same time); at least 15 cm away from walls, fabrics or other objects; make sure there is no surrounding Heat sources and light and dark fire sources.

Information

  1. Take the low noise oxygen concentrator out of the box and place it stably next to a suitable socket indoors (no other electrical appliances should be connected to the socket used at the same time); at least 15 cm away from walls, fabrics or other objects; make sure there is no surrounding Heat sources and light and dark fire sources.

https://en.sanaihealth.com/news/147.html

  2. Take out the cable tie. Please lay the machine horizontally, take out the white cable tie at the bottom of the machine for fixing the compressor, and pull out the cable tie from the direction of the knot.

  3. Disinfection of the oxygen suction tube and humidification cup of the low noise oxygen concentrator. When using it for the first time, if the oxygen suction tube and the humidification cup have peculiar smell, please soak it in a solution of white vinegar and warm water in a ratio of 1:3 for 30 minutes, rinse with clean water and dry it.

  4. Wet the water in the cup. Place the oxygen generator vertically and flat, remove the humidification cup, and open the hatch of the humidification cup. Pour 1/3 distilled or purified water into the cup (the water level should be between the MIN and MAX levels of the container).

  5. The low-noise oxygen concentrator should wear a headset type oxygen inhalation tube or a nasal inhalation type oxygen inhalation tube.

  6. Connect the power cord to a socket with AC220V 50Hz power output

  7. Press the power switch on the back of the machine to the "I" position, the display screen flashes quickly, and an alarm sound of "di" is accompanied, indicating that the machine has been connected to the power supply normally, and the display screen is always On, about 4 seconds after the machine enters the normal working state.

  8. The low noise oxygen concentrator connects the oxygen suction pipe to the humidification cup, and adjusts the flowmeter to the required flow rate (the floating ball is located in the center of the scale line to read), and then the oxygen suction can be started.

Keyword:

Scan the QR code to read on your phone

img
  • Hotline: 400-187-6068

  • Phone: 0755-82727906

  • Address:Block E, Zhongji Low Earth Orbit Satellite Industrial Park, Keneng Road, Dongkeng Community, Fenghuang Street, Guangming District, Shenzhen

公众号二维码

Scan QR code

language
中国
韩国
韩国
韩国
韩国
韩国

Copyright: Shenzhen Sanai Health Technology Co., Ltd.    粤ICP备2021002090号   SEO标签